Senior Body Design and Release Engineer

🕒 Junho 8

Candidatar-se

Encontrar Vagas Remotas Similares

Configurar Alerta de Email para Novas Vagas

📊 Verifique sua pontuação de currículo para esta vaga

Melhore suas chances de conseguir uma entrevista verificando sua pontuação de currículo antes de se candidatar.

Enviar Currículo

Alten México

SiteLinkedInTodas as Vagas

10.000+ funcionários

Fundada em 1999

🚘 Automotivo

💼 Consultoria

Automotive • Consulting • Engineering

A ALTEN México é uma subsidiária do Grupo ALTEN, líder global em consultoria de engenharia e tecnologia. A empresa oferece um amplo portfólio de serviços, incluindo engenharia e P&D, serviços de TI, cibersegurança e gestão de projetos. Com expertise em setores como aeronáutica, automotivo e ciências da vida, a ALTEN México apoia principais clientes em suas estratégias de inovação. A empresa é comprometida com a inovação sustentável, a diversidade e a responsabilidade social corporativa, consolidando-se como referência em serviços terceirizados de engenharia e TI em diversos setores.

Descrição

• Responsible for the engineering, design, development, timing and production release for some of the following functions: Body-in-white / Body closure sheet metal and hinging / Fascia/bumper / Underbody shield and Wheel liners / Cladding & flares / Body exterior (moldings, badges, decals and vents) / Front Lighting / EE & Signal Lighting / Fixed Glass/ Wipers /Fuel Door components /systems from initial design concept through full volume production.

🎯 Requisitos

• Bachelor Degree in Mechanical Engineering or Electrical Engineering or equivalent • 5-8 yrs of engineering automotive component experience designing and developing on the following: Body in White, Closures, or Exterior Systems • CAD experience with Unigraphics NX, Catia V5 and Teamcenter in a production release environment BIW (Body in White) • Knowledgeable regarding high strength steels/ aluminum forming processes, weld parameters and GD&T • Experience with OEM or supplier on design and release • Experience/knowledge with Design Failure Mode & Effects Analysis (DFMEA) and Design Verification Plan & Report (DVP&R) and validation plans • BoM’s creation and edition • Knowledge and experience with composites and composite production processes • Release experience in both Mechanical and electrical components • Working knowledge of designing for EMC (Electromagnetic Compatibility) and ESD (Electrostatic Discharge) design/prevention • Prior exposure to automotive lighting specifications and standards an asset; electronics specifications • Experience with Design for Six Sigma (DFSS) and/or Reactive Green/Black Belt • BIW in-plant launch experience • Experience designing and developing injection molding, painting, and decorating plastic Class A components • CAE/Computational Fluid Dynamics (CFD) knowledge • Experience leading technical teams successfully across varied levels of management and between OEM and supply base • Experience regularly presenting to upper management for issue resolution decisions • Knowledge or experience of CAN/LIN bus and circuit analysis • Excellent MS Office skills (Word, PowerPoint, Excel, and Outlook) • CATIA V5 knowledge is a plus • Knowledge of Casting and Injection Molding processes is a plus • Possibility of traveling, valid passport, and visa preferable

🏖️ Benefícios

• Health Care Plan (Medical, Dental & Vision) • Family Leave (Maternity, Paternity) • Training & Development • Wellness Resources