Power Studies Engineer, PSCAD

🕒 Agosto 5

🇨🇦 Canadá – Remoto

⏰ Tempo Integral

🟠 Sênior

🔴 Especialista

👷🏻‍♀️ Engenheiro

👻 Score fantasma 30%

O que significa: quão provável esta vaga está aberta sem contratação ativa.Como ler: 60% ou mais significa que achamos que é uma vaga fantasma. Pontuações mais baixas preocupam menos.Como pontuamos: tempo em aberto, republicações, vagas abertas vs tamanho do time, rapidez para fechar vagas, e se o salário está divulgado.Observação: é uma estimativa de dados públicos, não um julgamento da empresa. Vagas reais podem ter pontuação alta, então use como uma dica, não como um fato.

Candidatar-se

Encontrar Vagas Remotas Similares

Configurar Alerta de Email para Novas Vagas

📊 Verifique sua pontuação de currículo para esta vaga

Melhore suas chances de conseguir uma entrevista verificando sua pontuação de currículo antes de se candidatar.

Enviar Currículo

Ehvert Mission Critical

SiteLinkedInTodas as Vagas

51 - 200 funcionários

Fundada em 1993

📦 Logística

🏥 Saúde

🏭 Manufatura

Logistics • Healthcare • Manufacturing

Ehvert Mission Critical é uma empresa especializada no projeto, construção e gestão de instalações críticas, com foco em data centers. A empresa oferece uma ampla gama de serviços, incluindo: • Avaliação de site (site assessment) • Planejamento • Projeto • Engenharia MEP (Mecânica, Elétrica e Hidráulica) • Automação predial e controles • Projeto de sistemas de TIC e de segurança • Modelagem da Informação da Construção (BIM) Sua expertise em processos e tecnologias avançadas de construção permite entregar projetos com maior qualidade, prazos de obra reduzidos e custos menores. A Ehvert Mission Critical já trabalhou com grandes clientes, incluindo universidades e grandes empresas do setor de energia, para criar data centers robustos e de alta capacidade.

Descrição

• Perform power system studies including load flow, short circuit, protective device coordination, arc flash, grounding, power quality, harmonic analysis, transient analysis, and reliability studies • Develop and maintain electrical system models using PSCAD, ETAP, SKM PowerTools, EasyPower, or similar software platforms • Perform electromagnetic transient (EMT) studies for switching events, faults, utility disturbances, and large load changes • Analyze high-density AI and mission-critical electrical loads affecting utility systems, emergency generation, UPS systems, and facility infrastructure • Support utility interconnection studies and coordinate with utility providers • Evaluate system reliability, redundancy strategies, contingency scenarios, and power system resiliency • Prepare technical reports, engineering calculations, study documentation, and engineering recommendations • Collaborate with electrical design teams on medium-voltage systems, substations, standby generation, UPS systems, mechanical electrical loads, and utility infrastructure • Participate in design coordination meetings with clients, consultants, utility providers, and project stakeholders • Support commissioning activities and provide technical expertise during project execution • Review engineering deliverables for technical accuracy, quality, and compliance with applicable industry standards

🎯 Requisitos

• Bachelor's or Master's degree in Electrical Engineering from an accredited university • 8–15 years of experience in power systems engineering, utility engineering, substations, transmission and distribution, industrial facilities, renewable energy, mining, or mission-critical infrastructure • Demonstrated experience performing transient, harmonic, grounding, load flow, short circuit, protective device coordination, and arc flash studies • Proficiency with PSCAD is required • Experience with ETAP, SKM PowerTools, EasyPower, DIgSILENT PowerFactory, CYME, or similar power system analysis software • Strong understanding of electrical power systems, utility infrastructure, substations, protective relaying, and system reliability • Experience with utility interconnections and medium-voltage power systems • Experience with underground duct bank ampacity and heat studies using Neher-McGrath methodology is an asset • Registration as a Professional Engineer (P.Eng.) in Canada, or eligibility to obtain registration, is an asset • Strong knowledge of the Canadian Electrical Code (CEC), CSA standards, IEEE standards, utility requirements, and applicable provincial electrical regulations • Familiarity with U.S. codes and standards (NEC, NFPA, IEEE) is an asset • Excellent technical writing, analytical, problem-solving, and communication skills, with the ability to present technical findings and recommendations to clients • Experience supporting data center, utility, industrial, or other large-scale infrastructure projects is highly desirable • Must be legally authorized to work in Canada

🏖️ Benefícios

• Experience in a high-tech industry within an international company • Opportunity to work on unique, cutting-edge hyperscale and AI data center projects • Comprehensive training and professional development opportunities • Supportive leadership and a collaborative team environment • Career growth and advancement opportunities • Competitive salary • Comprehensive benefits package, including extended health, dental, vision, life and disability insurance, paid vacation, retirement savings program (where applicable), and other employee benefits • Stock ownership / synthetic equity opportunities • Flexible remote work environment • Outstanding career development opportunities