Lead Electrical and Controls Engineer – Paper Industry

Vaga não está no LinkedIn

🕒 Outubro 16

🐊 Florida, Illinois, +4 estados a mais – Remoto

🐊 Florida – Remote 🌽 Illinois – Remote 🏈 Ohio – Remote ❄️ Minnesota – Remote 🏰 Missouri – Remote 🧀 Wisconsin – Remote

💵 $110.000 - $140.000 / ano

⏰ Tempo Integral

🟠 Sênior

👷🏻‍♀️ Engenheiro

👻 Score fantasma 2%

O que significa: a chance de ninguém estar realmente contratando para esta vaga.Como ler: 60% ou mais significa que achamos que é uma vaga fantasma. Pontuações mais baixas preocupam menos.Como pontuamos: tempo em aberto, republicações, vagas abertas vs tamanho do time, rapidez para fechar vagas, e se o salário está divulgado.Observação: é uma estimativa de dados públicos, não um julgamento da empresa. Vagas reais podem ter pontuação alta, então use como uma dica, não como um fato.

Candidatar-se

Encontrar Vagas Remotas Similares

The Foth Companies

SiteLinkedInTodas as Vagas

501 - 1000 funcionários

Fundada em 1938

🏗️ Construção

📦 Logística

🏭 Manufatura

Construction • Logistics • Manufacturing

As Empresas Foth são uma firma de engenharia e consultoria multidisciplinar com mais de 85 anos de experiência. Elas se especializam em uma gama diversificada de serviços, incluindo automação, aviação, engenharia costeira e de orla, e dragagem, entre outros. A empresa oferece engenharia para manufatura de produtos, ciência ambiental, serviços geoespaciais, logística, mineração e projetos de transporte. A Foth oferece consultoria estratégica e planejamento, com foco em conformidade regulatória, serviços de resíduos sólidos e projetos de água e águas residuais. A empresa opera na América do Norte e globalmente, colaborando com comunidades e indústrias privadas para criar projetos transformacionais. A Foth é reconhecida por sua cultura centrada no empregado e ênfase na inovação e impacto positivo na comunidade, tornando-se um ímã para os melhores talentos de engenharia e científicos.

Descrição

• Provide technical hardware and software design leadership for industrial projects • Develop design packages for bid and construction • Coordinate and execute PLC/DCS, HMI, VFD, and servo motion design and programming from hardware design and software integration through construction start-up • Coordinate electrical engineering and lead design/CAD resources • Provide hardware and software design for machine design projects in consumer products and general industrial markets • Assist with project documentation, including schedules, specifications, and cost estimates • Produce high-quality project deliverables in a collaborative team environment • Gather data and provide installation, start-up, and troubleshooting support • Work simultaneously on multiple project and client teams • Respond to ongoing controls troubleshooting requests, including production equipment support that may involve nights and weekends • Interface directly with clients daily to understand and respond to their needs • Develop client and facility relationships and cultivate future work opportunities • Travel to client sites and Foth office locations as needed, approximately 35% annually

🎯 Requisitos

• Bachelor’s Degree in Electrical Engineering or a combination of two- or four-year technology degree supplemented with equivalent technical training or experience • 10+ years of relevant engineering/design experience with exposure to manufacturing environments, including troubleshooting complex projects • Recent experience with industrial intelligent linear actuators and end effectors • Recent experience integrating machine vision • Recent experience with Rockwell ControlLogix-based PLC and FactoryTalk View HMI hardware and software • Recent experience with Rockwell PowerFlex VFDs and inverter-duty motors • Recent experience with Rockwell Kinetix servo drives and motors • Recent experience with Ethernet and Ethernet/IP networking • Recent experience with electrical system design schematics and control panel layout design • Recent experience developing construction and installation documentation • Recent experience with sensing technologies and panel design/layout • Recent experience producing engineering construction and bid packages according to employer/client standards • Recent experience with flow control valves, damper actuators, P&IDs, loop configurations, DCS, thermocouples, level, flow, and temperature controls • Professional Engineer (PE) license or ability to obtain within 24 months of start date preferred • Knowledge of ISO 13849-1 and RIA 15.06 safety standards and risk assessments preferred • Preferred experience with robotics, vision systems, 3D scanners, AutoCAD, AutoCAD Electrical, MES/database programming, SQL, RS-SQL, MS Access, polymer extrusion and/or adhesive systems, Siemens S7 and TIA Portal PLCs/HMIs, Siemens or Schneider/Modicon PLCs, Siemens/CH/Schneider HMIs, Visual Basic, Visual Basic.NET, Visual C, C#, C++, XML, assembly language, packaging line integration, paper/paper converting industry, distribution and logistics technology/automation, and DeltaV/Honeywell

🏖️ Benefícios

• Bonuses through the Earned Performance Incentive program • On-the-Spot bonuses • Quarterly and/or annual bonuses for exempt members • Medical insurance • Dental insurance • Vision insurance • Employee assistance program • Disability benefits • Retirement benefits • Holiday pay • Paid time off • Several other voluntary benefits • Flexible work environment • Professional growth opportunities

📊 Verifique sua pontuação de currículo para esta vaga

Melhore suas chances de conseguir uma entrevista verificando sua pontuação de currículo antes de se candidatar.

Enviar Currículo