Senior Protection and Control Engineer

🕒 Ontem

🏄 California, Ohio, +2 estados a mais – Remoto

🏄 California – Remote 🏈 Ohio – Remote 🚗 Michigan – Remote 🤠 Texas – Remote

💵 $115.000 - $165.000 / ano

⏰ Tempo Integral

🟠 Sênior

🧑‍💻 Engenheiro Full-stack

Candidatar-se

Encontrar Vagas Remotas Similares

Configurar Alerta de Email para Novas Vagas

📊 Verifique sua pontuação de currículo para esta vaga

Melhore suas chances de conseguir uma entrevista verificando sua pontuação de currículo antes de se candidatar.

Enviar Currículo

GE Vernova

SiteLinkedInTodas as Vagas

10.000+ funcionários

💼 Consultoria

📦 Logística

🏭 Manufatura

Consulting • Logistics • Manufacturing

GE Vernova é líder no setor de energia, com mais de 130 anos de experiência, dedicada a eletrificar o mundo enquanto o descarboniza. A empresa oferece um amplo portfólio de soluções em energia, incluindo tecnologias de geração a gás, hidrelétrica, nuclear e eólica, com o objetivo de fornecer energia confiável, acessível e sustentável. Com forte foco em inovação, a GE Vernova desempenha um papel significativo na redução da pegada de carbono dos sistemas de energia globais e apoia a transição para emissões líquidas zero (net zero) até 2030.

Descrição

• Ultimately be responsible to ensure high quality design of protection schemes for all kinds of T&D substations, Data Centers, Industrial, BESS applications including one-lines, three-lines, AC / DC schematics, and relay settings • Review, propose optimization and seal (P.E. stamp) protection and control designs prepared by himself or other team members • Responsible for leading and coordinating all P&C technical aspects of AC power substation projects, especially ensuring successful and safe operation of power system equipment • Review, propose optimization and seal (P.E. stamp) single line diagrams and detailed design for auxiliary systems (Diesel Generator, Low Voltage Switchgear, AC/DC distribution panels, batteries and battery chargers) • Review power system load flow studies, fault studies, relay setting coordination, and transient studies performed by other agencies • Develop or Review outage, cut-over, and testing procedures • Be familiar with IEC 61850 process and system bus architecture and its implementation for substations • Interface with internal and external team members such as Protection and Control Engineers, Lead engineers, Project Engineers, Electrical Designers, Civil Engineers, Physical Designers, Draftsmen, Project managers, Sourcing, and support organization • Interface with customer technical representatives • Review and analysis post fault records in order to confirm correct operation of the system design • Lead or support factory acceptance testing and site testing & commissioning • Work on development of proposals including: writing and/or reviewing technical specifications, estimating design man-hours and materials, supporting sourcing for vendor quotations, and the development of clarifications and exceptions as well as technical responses and performing technical validation • Extensive experience in technical problem solving and Lean techniques • Mastering of secondary engineering discipline (process, tools and technical aspects) • Work on development of high-quality design templates and tools to support the secondary design engineering team and the business • Define processes, procedures, perform RCA's (Root Cause Analysis), perform corrective actions, and validate process control • Support quality initiatives including aspects of ISO 9002 • Demonstrate leadership behaviors of acting with humility, lead with transparency and deliver with focus

🎯 Requisitos

• Bachelor's Degree in Electrical Engineering from an accredited university or college • Must have PE License in Ohio, Indiana, Michigan, Texas, or California; or a P.Eng in Canada • Minimum 10 years of experience in system protection schemes, relay selection, primary equipment interface requirements, operational analysis, communication systems and maintenance practices for transmission, distribution, and generation protection applications at both AIS and GIS substations • Minimum 10 years of experience in design reviews and technical mentoring • Ability and willingness to travel up to 10% of the time, including international, for meetings and on-site commissioning tests for customer installations

🏖️ Benefícios

• medical, dental, vision, and prescription drug coverage • access to Health Coach from GE Vernova, a 24/7 nurse-based resource • access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services • Retirement benefits including the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants • Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance, 12 paid holidays, and permissive time off