Mechanical Engineer V – Design

πŸ•’ October 6

Where this job comes from

Posted on Voyager Technologies's careers page β†—Voyager Technologies's careers page, not through a job board

First seen by Remote Rocketship October 6

Still open on Voyager Technologies's site. Checked 3 hours ago.

Apply Now
Logo of Voyager Technologies

Voyager Technologies

501 - 1000 employees

Founded 2019

🏭 Manufacturing

πŸ“¦ Logistics

πŸŽ–οΈ Defense

Manufacturing β€’ Logistics β€’ Defense

Voyager Technologies is a global leader in national security and space solutions, delivering mission-critical technologies and services from ground to orbit. The company develops controllable solid propulsion systems, rad‑hard laser and RF communications, guidance, navigation & control, space cameras and image processors, and space infrastructure such as airlocks and commercial microgravity research platforms. Voyager supports satellite constellations, ISR/signals intelligence, launch and mission services, in-space servicing and assembly, and is a founding partner of the Starlab commercial space station initiative.

πŸ“‹ Description

β€’ Design complex actuators, specialized igniters, pressure vessels, solid rocket motor systems, hot gas valves, and rocket thrusters β€’ Conduct actuator performance analysis, trade-off analysis, simulations, structural, dynamic, and thermal analysis β€’ Create advanced 2D and 3D CAD models and technical drawings β€’ Interpret GD&T symbols and provide guidance on dimensional and tolerance requirements β€’ Characterize ceramic, insulator, refractory metal, and advanced metal materials β€’ Optimize designs, select manufacturing materials and processes, and specify quality-control checks including NDT methods β€’ Lead assembly, composite fabrication, machining, molding, casting, and welding activities β€’ Develop and execute testing, including component integration, measurement instrumentation, calibration, test-data acquisition, statistical analysis, and visualization β€’ Conduct mass estimation, requirements analysis, risk management, failure-mode analysis, and reliability and safety planning β€’ Support procurement, vendor evaluation, supplier-performance analysis, contract management, and schedule management β€’ Analyze grain design, propellant chemistry, combustion, internal ballistics, and solid propellant manufacturing β€’ Design basic control systems and contribute to avionics, ignition, wiring-harness, circuit-board, and software-design activities

🎯 Requirements

β€’ Able to obtain and maintain a U.S. security clearance β€’ Ten (10) to fifteen (15) years of mechanical engineering experience β€’ Bachelor of Science required in mechanical engineering, aerospace engineering, or another relevant engineering discipline from an accredited university; equivalent experience may be considered in lieu of degree β€’ U.S. citizen, lawful permanent resident of the U.S., protected individual under 8 U.S.C. 1324b(a)(3), or eligible to obtain required U.S. Department of State authorizations under ITAR β€’ Rocket motor design and testing experience preferred β€’ Master of Science in mechanical engineering, aerospace engineering, or another relevant engineering discipline preferred β€’ Able to travel approximately 10% of the time β€’ Positive, cooperative, self-motivated, and professional behavior preferred

πŸ–οΈ Benefits

β€’ Discretionary annual bonus plan β€’ Paid time off (PTO) β€’ Comprehensive health benefit package β€’ Retirement savings β€’ Wellness program β€’ Various other benefits

Apply Now

πŸ“Š Check your resume score for this job

Improve your chances of getting an interview by checking your resume score before you apply.

Similar Jobs

πŸ•’ October 6

Astreya

1001 - 5000

πŸ’Ό Consulting

πŸ“¦ Logistics

πŸ“£ Marketing

Principal AI datacenter design engineer leading complex data hall designs and infrastructure programs for Astreya. Setting standards, guiding architecture, and coordinating technical initiatives.

πŸ•’ October 5

General Dynamics Ordnance and Tactical Systems

1001 - 5000

πŸš€ Aerospace

πŸŽ–οΈ Defense

🏭 Manufacturing

Principal Mechanical Engineer leading structural design and analysis of solid rocket motor hardware. Supporting General Dynamics’ munitions, weapons, and missile subsystem programs.

πŸ•’ October 2

AECOM

10,000+ employees

πŸ’Ό Consulting

πŸ₯ Healthcare

πŸ“¦ Logistics

Mechanical Engineering Lead designing HVAC, piping, and fire suppression systems for AECOM’s hyperscale data center projects. Leading client-facing delivery across U.S. remote locations.

πŸ•’ October 2

AECOM

10,000+ employees

πŸ’Ό Consulting

πŸ₯ Healthcare

πŸ“¦ Logistics

AECOM mechanical engineering lead designing HVAC, piping, and fire protection systems for hyperscale data centers. Leading client-facing delivery, construction support, and multidisciplinary coordination.

πŸ•’ October 2

AECOM

10,000+ employees

πŸ’Ό Consulting

πŸ₯ Healthcare

πŸ“¦ Logistics

Mechanical Engineering Lead designing HVAC, piping, and fire suppression systems for AECOM’s hyperscale data center projects. Leading multidisciplinary teams and client delivery across the United States.

Developed byΒ Lior Neu-ner. I'd love to hear your feedback β€” Get in touch via DM or support@remoterocketship.com
Follow Remote Rocketship on LinkedInFollow Remote Rocketship on InstagramFollow Remote Rocketship on FacebookFollow Remote Rocketship on TikTok