
5001 - 10000 employees
đ Manufacturing
đź Consulting
đŚ Logistics
Manufacturing ⢠Consulting ⢠Logistics
Mission Technologies is a division of HII focused on delivering advanced technologies and solutions to enhance national security. The company specializes in a variety of capabilities, including cyber and space operations, advanced military technologies, and integrated systems for air, land, and sea forces. Through innovative strategies such as AI and C5ISR, Mission Technologies aims to strengthen the operational capabilities of the U. S. military and support joint operations across multiple domains.
đĽ 0 minutes ago
đ Alabama â Remote
đľ $136.4k - $176.8k / year
â° Full Time
đ Senior
đ´ Lead
đˇđťââď¸ Engineer
Improve your chances of getting an interview by checking your resume score before you apply.

5001 - 10000 employees
đ Manufacturing
đź Consulting
đŚ Logistics
Manufacturing ⢠Consulting ⢠Logistics
Mission Technologies is a division of HII focused on delivering advanced technologies and solutions to enhance national security. The company specializes in a variety of capabilities, including cyber and space operations, advanced military technologies, and integrated systems for air, land, and sea forces. Through innovative strategies such as AI and C5ISR, Mission Technologies aims to strengthen the operational capabilities of the U. S. military and support joint operations across multiple domains.
⢠Provide technical support for Aviation Environmental Control Systems to the Army Maneuver Air Directorate and Propulsion Branch ⢠Review test plans, test reports, and analyses for specification and qualification compliance ⢠Review quality escapes and Manufacturing Review Boards and document airworthiness concerns ⢠Recommend requirements coverage, success criteria, risks, corrective actions, and improvements for test plans and reports ⢠Support test witnessing, test-result evaluation, post-test inspections, and hardware condition and performance recommendations ⢠Review technical changes to manuals and maintenance procedures ⢠Participate in program and design reviews and technical meetings ⢠Support failure investigations and procedure validations/verifications ⢠Provide technical and project engineering support for Environmental Control improvements under the Component Improvement Program ⢠Support depot and repair activities, Maintenance and Overhaul plan and hardware repair reviews, and Product Verification Audits ⢠Support alternate source evaluations, intercept actions, and Defense Logistics Agency engineering requests ⢠Provide technical support for Condition Based Maintenance and Cost Wise Readiness activities ⢠Provide technical input on Foreign Military Sales support ⢠Document processes and methodologies for Environmental Control System design and airworthiness qualification ⢠Generate memorandums, briefings, recommendations, and analyses for Government use ⢠Perform thermal, risk, reliability, data reduction, and performance analyses and recommend corrective actions ⢠Provide engineering support for Environmental Control Systems on helicopters, unmanned air vehicles, and fixed-wing platforms
⢠15 years relevant experience with a bachelor's degree in a related field, 13 years with a master's degree, 10 years with a PhD or Juris Doctorate, or high school diploma/equivalent with 19 years relevant experience ⢠Preferred: 18 years relevant experience with a bachelor's degree, 16 years with a master's degree, or 14 years with a PhD or Juris Doctorate ⢠Ability to document Environmental Control System design and airworthiness qualification processes and methodologies ⢠Ability to generate memorandums and briefings using MS Word and PowerPoint ⢠Ability to perform data reduction and analysis to evaluate Environmental Control and component performance ⢠Ability to provide written recommendations concerning Environmental Control System serviceability and airworthiness requirements ⢠Ability to read and understand engineering drawings and parts lists ⢠Ability to write clear and concise memorandums ⢠Engineering support experience with helicopters, unmanned air vehicles, and fixed-wing platforms ⢠Documented working knowledge of thermal analyses ⢠Experience using or developing software tools for steady-state and transient thermodynamic design and analysis ⢠Experience with heating, cooling, and dehumidification calculations for air, water, hydraulic fluid, gas, vapor, and steam systems ⢠Documented experience performing risk analysis, reliability analysis, data reduction, and performance analysis ⢠Must be a US Citizen ⢠Must have a DoD Secret Security Clearance ⢠Must be able to travel up to 20% of the time ⢠Preferred working knowledge of DoD software programs including PDREP, TAMMS-A/MCDS, SRD Task Tracking System, and ETMs/IETMs ⢠Preferred experience conducting Fault Tree Analysis ⢠Experience or knowledge writing and reviewing Aeronautical Design Specifications such as ADS-50 and AMACC is a plus ⢠Knowledge of MIL-STD-810 Environmental Testing requirements ⢠Experience writing and reviewing AWIS, SSRAs, System Safety Management Plans, FMECA/FEMA, and Safety Design Requirements Definition ⢠Preferred education/experience combinations include Bachelor of Science in Engineering with 25 years, Master of Science in Engineering with 23 years, or PhD in Engineering with 21 years ⢠May require working in office, industrial, shipboard, or laboratory environments ⢠Capable of climbing ladders and tolerating confined spaces and extreme temperature variances
⢠Best-in-class medical, dental and vision plan choices ⢠Wellness resources ⢠Employee assistance programs ⢠Savings Plan Options (401(k)) ⢠Financial planning tools ⢠Life insurance ⢠Employee discounts ⢠Paid holidays ⢠Paid time off ⢠Tuition reimbursement ⢠Early childhood education scholarships ⢠Post-secondary education scholarships ⢠Bonus/other non-recurrent compensation occasionally offered for qualified positions, if applicable ⢠Professional development opportunities ⢠Educational and training programs for continual career growth
Apply NowđĽ 1 hour ago
10,000+ employees
đź Consulting
đĽ Healthcare
đŚ Logistics
ICAM IdP Engineer designing and operating secure federation services for GDITâs DoD enterprise. Supporting authentication, SSO, MFA, and Zero Trust across 4 million identities.
đşđ¸ United States â Remote
đľ $170k - $230k / year
â° Full Time
đ Senior
đ´ Lead
đˇđťââď¸ Engineer
đŚ H1B Visa Sponsor
đĽ 1 hour ago
10,000+ employees
đź Consulting
đĽ Healthcare
đŚ Logistics
ICAM Identity Provider Engineer securing authentication and federation for 4M+ DoD identities. Designing resilient ADFS, SSO, MFA, and Zero Trust services at GDIT.
đşđ¸ United States â Remote
đľ $170k - $230k / year
â° Full Time
đ Senior
đ´ Lead
đˇđťââď¸ Engineer
đŚ H1B Visa Sponsor
đĽ 1 hour ago
10,000+ employees
đź Consulting
đĽ Healthcare
đŚ Logistics
GDIT ICAM Engineer designing secure IdP and federation services for 4 million DoD identities. Supporting ADFS, SSO, MFA, Zero Trust, and enterprise application integrations remotely.
đşđ¸ United States â Remote
đľ $170k - $230k / year
â° Full Time
đ Senior
đ´ Lead
đˇđťââď¸ Engineer
đŚ H1B Visa Sponsor
đĽ 1 hour ago
Controls Engineer designing PLC systems and commissioning automated material-handling solutions for Dematic. Managing engineering deliverables, project risks, schedules, and customer-site modernization work across the continental USA.
đşđ¸ United States â Remote
đľ $96.8k - $172.8k / year
â° Full Time
đĄ Mid-level
đ Senior
đˇđťââď¸ Engineer
đĽ 1 hour ago
Controls Engineer designing schematics, PLC systems, and complex automated material-handling solutions for Dematic. Managing engineering deliverables, commissioning, project risks, and customer-site deployments across the continental USA.
đşđ¸ United States â Remote
đľ $96.8k - $172.8k / year
â° Full Time
đĄ Mid-level
đ Senior
đˇđťââď¸ Engineer