
10,000+ employees
🚘 Automotive
🤝 B2B
🛒 Retail
💰 IPO on 1978-01
Automotive • B2B • Retail
Genuine Parts Company is a leading global service provider of automotive and industrial replacement parts and value-added solutions. Established in 1928, GPC operates two main segments: an Automotive Parts Group (brands and operations including NAPA, UAP, Alliance Automotive Group, and GPC Asia Pacific) across North America, Europe and Australasia, and an Industrial Parts Group (including Motion and Motion Asia Pacific) across North America and Australasia. The company supports a vast network of over 10,800 locations in 17 countries and more than 65,000 employees, focusing on distribution of replacement parts, accessories and value-added services for repair shops, businesses and retail customers.
🕒 October 16
Where this job comes from
Posted on Genuine Parts Company's careers page, not through a job board
First seen by Remote Rocketship October 16
Still open on Genuine Parts Company's site. Checked 2 hours ago.

10,000+ employees
🚘 Automotive
🤝 B2B
🛒 Retail
💰 IPO on 1978-01
Automotive • B2B • Retail
Genuine Parts Company is a leading global service provider of automotive and industrial replacement parts and value-added solutions. Established in 1928, GPC operates two main segments: an Automotive Parts Group (brands and operations including NAPA, UAP, Alliance Automotive Group, and GPC Asia Pacific) across North America, Europe and Australasia, and an Industrial Parts Group (including Motion and Motion Asia Pacific) across North America and Australasia. The company supports a vast network of over 10,800 locations in 17 countries and more than 65,000 employees, focusing on distribution of replacement parts, accessories and value-added services for repair shops, businesses and retail customers.
• Perform on-site belt installation, splicing, preventative maintenance, and occasional emergency repairs • Fabricate lightweight and/or heavyweight belts in the shop • Perform rigging to lift belt rolls, presses, and tooling on and off conveyor systems • Perform basic millwright tasks, including torch heating and cutting, and remove/install conveyor components such as bearings, idlers, pulleys, gearboxes, and motors • Serve as customer contact on technical and service-related issues • Install, diagnose, repair, and support equipment at customer sites • Diagnose equipment problems, assess issue extent, document findings, and decide whether to repair or replace parts • Keep customers informed about service provided and outstanding issues; recommend system enhancements, upgrades, or repairs • Provide technical support and training to customers on operational or maintenance aspects of system equipment • Communicate technical information to technical and non-technical stakeholders and meet customers daily or as required • Perform on-site services for new and existing clients, including emergency repairs, equipment servicing, and equipment upgrades on a 24/7 on-call basis • Ensure processes and environmental conditions comply with regulatory agencies and Motion safety standards • Work under direct supervision and follow detailed guidelines for moderately complex repairs and installations • Work safely, courteously, and professionally • Perform other duties as assigned
• Typically requires a technical degree and zero (0) to three (3) years of related experience or an equivalent combination • Ability to read measuring and equipment and perform basic math calculations • Ability to operate shop equipment safely • Ability to operate (be trained to operate) manlifts, forklifts, hand power tools and shop equipment safely • Excellent communication skills • Ability to work effectively with customers, peers and management to resolve client issues • Willingness and ability to drive company vehicles in alignment with Company policy required within one year of start date; DOT/DoT preferred • Must be in alignment with company drug free workplace and other required customer regulatory requirements • Ability to push/pull up to 100 pounds • Ability to lift/carry up to 100 pounds • Ability to lift bulky objects • Ability to perform neck rotation, trunk rotation, stair climbing, repetitive bending, kneeling, sustained squat, forward reaching, overhead reaching, reach and lift, ladder climb and carrying/crawling • Working at heights from manlifts, platforms and elevated walkways may be required • Requires wearing safety equipment and safety harness • Working conditions may be indoor and/or outdoor; noise level may be loud at times
• Healthcare coverage options • 401(k) • Tuition reimbursement • Vacation pay • Sick pay • Holiday pay
Apply NowImprove your chances of getting an interview by checking your resume score before you apply.
🕒 October 16
Field Service Engineer maintaining Agfa DR, x-ray, and imaging systems for Orlando healthcare customers. Troubleshooting, installing, and supporting hospital imaging technology.
🕒 October 16
Field Service Technician maintaining retail self-checkout and networking equipment for NCR Voyix. Performing installations, repairs, preventive maintenance, and customer service across Kansas.
🇺🇸 United States – Remote
💵 $17 - $19 / hour
💰 $820M Post-IPO Equity on 2015-11
⏰ Full Time
🟠 Senior
🔴 Lead
🔧 Field Service Engineer
🦅 H1B Visa Sponsor
🕒 October 16
Field Service Technician installing and servicing digital cinema, projection, audio, and signage systems. Supporting theatre, financial, healthcare, and retail customers nationwide.
🕒 October 15
Senior Field Solutions Engineer advancing Miovision’s AI-powered traffic technology for Northeast cities. Designing ITS solutions, leading pilots, and expanding municipal software adoption.
🇺🇸 United States – Remote
💰 $26.2M Venture Round - Miovision on 2023-10
⏰ Full Time
🟠 Senior
🔧 Field Service Engineer
🕒 October 15
Field Service Technician diagnosing and repairing electronic and mechanical aviation security equipment. Serving Analogic customers at Amarillo airport and surrounding field sites.